AW: [HBF] Rotationsanschwänzer

[Thomas Rohner]

Hi Dan

thank you for answering my "problem". My sparger doesn't rotate mainly
because i removed the rubber plugs on both ends. The flow rate would
be too low with the plugs in. I guess my version is for 5 gal batches.
So i don't use it the intended way but it works anyway.

thanks again  Thomas



Dan Listermann schrieb:
> Entschuldigen Sie mir, aber meine Hochschule Deutsch ist nicht gut.  Ich 
> muss Englisch schreiben.
> 
> If the sparge arm does not rotate, the likely cause is a bent wire at 
> the joint of the arm where the little ball that holds the assembly 
> together. Try to see if you can straighten this wire by pushing on the 
> ball.
> 
> Maybe Phil can translate.
> 
> Dan Listermann
>